Sapphire Series LT Horizontal Bed Head Trunking Unit with Lights – IMH

Specifications

Materials and Construction

Enclosure shall be constructed of extruded, anodized aluminum alloy sections to provide a modular surface mounted unit.

The Sapphire Series LT system can be manufactured in lengths that range from 1,220 mm to 2,440 mm.
Fascia panels, top and bottom cover panels shall be removable to provide access for easy installation and maintenance of the services.
Laminated Fascia
Aluminum strips with High pressure laminate (HPL) with three (3) colors to choose from.
Covers and End Caps
Top and bottom cover panels are made of power coated extruded aluminum. End caps are made of injection molded ABS Fire Retardant plastic.
Medical Gas Outlets
Amico Corporation manufactures several compatible connection types for Medical Gas and Vacuum Outlets.
Electrical Wiring
Wire for standard and critical branch power circuits shall be #10 or #12 (as specified) type THHN stranded copper wire, 600 volt, with heat resistant thermoplastic insulation for hot (black) and neutral (white). Grounds shall be #10 type R THHN stranded copper wire (green). All ground conductors shall be factory installed in conduit.
Grounding and Bonding
Each power receptacle shall have a ground conductor connected to a grounding screw. A grounding bus will be installed in each device location.
Electrical Receptacles
Shall be Hospital Grade 15 or 20 amp, 120 or 277 volt, UL listed and marked Hospital Grade. Quantity and type as shown on drawings. Amico shall furnish and install receptacles with wiring required, as shown on submittal shop drawings.
Duplex Receptacles
shall be NEMA style 5-15R or 5-20R, color Ivory for use on normal power circuits, and color Red for use on critical branch power circuits.
Simplex Receptacles
shall be NEMA style 5-15R or 5-20R, color Ivory for use on normal power circuits, and color Red for use on critical branch power circuits.

General Specifications

Fully customized to meet your facility’s specific needs
Designed in accordance with HTM and/or NFPA design guides for Bed Head units
Smooth rounded edges for infection control and durability
Powder coated access panels or laminate colors for product longevity and to meet your room décor
Medical gas piping use blank 3 1/2″ capped ends located on the back of the console unit

Features

Product Benefits

Any NFPA or HTM outlets can be used
High impact resistant end caps made from injection molded fire retardant ABS plastic
Removable laminate panels for access to electrical services
Accommodates almost any configuration of medical gas outlets, electrical and communication services
High powered factory installed lights located at the top and bottom of the unit
Three standard colors of hospital grade laminate to choose from
Surface mounted outlets allow ease of access for annual maintenance
Individual gas outlet connection
Individual electrical wiring connection
Upgradable to LED lights with a 20 year guarantee
Seamless overlapping edges

Product Features

1) High impact resistant end caps made from injection molded retardant ABS plastic

2) High powered factory installed lights located at the top and bottom of the unit (15 or 20 amp, 120 or 277 volt light bulbs)

3) Accommodates almost any configuration of communication services, electrical devices and medical gas outlets

4) Removable laminate panels for access to electrical services

5) Surface mounted outlets allow ease of access for annual maintenance

6) The material for the backing plate is G90 Galvanized Steel (Ga #16)

7) Individual electrical wiring connection

8) Individual gas outlet connection

Specifications

Materials and Construction

General Specifications

Features

Product Benefits

Product Features

Related Products

Downloads

Brochures

address

Phone

Email

Our brands